Quick Connect

Our Services

LAYING OF D.P.C. AND ITS PROTECTIVE COATING by BONDFIT 8000 & STANRO IW-4

D.P.C. is most important part of the Building. If we do not bother about it, then the problem of rising dampness in the Building, whether it is Residential, Commercial or Factory Building, the rising dampness will create big problem such as peeling of plaster, producing of harmful bacteria etc., which is very dangerous for the Human Life. In fact, it creates lot of diseases and its look would also be very bad. Not only this, if the dampness appears in your Drawing Room, it will also become very shabby. It is therefore, very necessary to control the rising of dampness in the D.P.C. from its very initial stage.

Product Recommended: BONDFIT 8000 & STANRO IW-4 While casting the D.P.C., add STANRO IW-4 in Cement Concrete to make it watertight. STANRO IW-4 is a Waterproofing Compound ideal for construction of water tanks, basement foundations, swimming pools, roof slabs, tunnels, bathrooms, floors, walls and reservoirs. STANRO IW-4 is an integral waterproofing admixture for concrete and mortars. It is used to minimize permeability and increasing the waterproofing property. It has excellent plasticizing properties, which helps to reduce the size of the capillaries and makes the concrete dense and watertight.

On Vertical and Horizontal D.P.C., apply two coats of BONDFIT 8000. BONDFIT 8000 is a flexible, polymer modified, hydraulically setting two component waterproofing system, free from solvent, used for concrete, brickwork, masonry etc. BONDFIT 8000 systems, after curing, provide a flexible & elastic, crack bridging, seamless waterproofing layer, which is abrasion resistant. It is non-toxic, anti fungus and develops excellent bond to most of the building materials. It is most suitable for waterproofing of swimming pools, Terraces, Bathrooms, Basements, Underground water tank and retaining structures.

BATHROOM/ KITCHEN/ FLOOR TRAPS BONDING by HIGH BOND-40

HIGH BOND-40 provides excellent bond to concrete, masonry, stonework, plaster etc. Before the application of HIGH BOND-40, the surface must be clean, sound and free from loose particles, dust, oil & grease. HIGH BOND-40 base should be lightly moistened before commencing work and should be slightly damp but still absorbent and should never be saturated with water.

SEALING CRACKS BY CRACKSEAL RTV (ACRYLIC BASE)

CRACKSEAL RTV is high quality dispersion based acrylic sealant exhibiting high elastic recovery and good low temperature flexibility. It has good adhesion to moist or wet surface, concrete, steel, aluminum, wood and plastic and has excellent over coating properties. CRACKSEAL RTV can be used to seal all kinds of indoor and outdoor joints. Typical applications include joints between window frames and concrete masonry, joints between wooden components, expansion joints in aerated concrete and between concrete building components of smaller size. It may also be used externally, provided it is applied in dry weather conditions and a skin has formed before being exposed to rain/damp atmospheric condition.

SEALING OF WATER TANK/ PLASTER TANK JOINTS by AQUAEP

AQUAEP will patch and seal concrete, metals, wood, fibreglass and many other materials, exposed to corrosion by water and air. As AQUAEP works chemically, it does not require "Squeegee" or pressure treatment. AQUAEP chemically eliminates trapped water. AQUAEP prevents corrosion and provides a hard, durable, waterproof seal to the surface being coated or patched

PERMANENT REPAIRING SYSTEM FOR DAMAGED FLOOR AND FLOOR JOINT

Product Recommended: "Cinter SL Screed 'J'/'F' "

Its two component system consisting of Base (component A), Hardener (component B). It increases the life span of joint & floor. Provide a joint less flooring, smooth and dust free. Chemical resistant filling Kota joints, mandana stone joint etc. Provide tough floor topping. It can be used in all mechanical industries, textiles industries, paper industries, automobile workshop, Pharmaceutical Industries, Electronic Assembly Area, and any type of floor repair.

WATERPROOFING cum PROTECTION OF CONCRETE SURFACE/ PLASTER SURFACE/ STONE ETC.

B. GUARD ST is a flexible coating, a unique product, which is designed to cope with extreme stress and strain of expansion and contraction of exposed reinforced concrete structures and plaster wall surface. B.GUARD ST is a cold applied, one component elastic material on an aliphatic acrylate polymer base for use on vertical as well as horizontal surfaces. Upon curing B.GUARD ST forms a seamless and joint free, watertight, flexible and elasticmembrane, thereby making the treated surface absolutely impervious to water. It exhibits excellent resistance to aggressive attacks from industrial pollution & UV Rays. It also increases the insulation capacity of wall B. GUARD ST (R) provides excellent, reliable and long lasting waterproofing to walls & inclined roofs.After curing, it forms a membrane that is flexible and watertight. Even porous building materials will not absorb water. B. Guard ST (R) forms an excellent barrier to carbon dioxide, chloride ions, sulphates, oxygen and water and is highly durable in all climatic conditions.

WATERPROOFING TREATMENT OF ROOF SLABS, SLOPPING ROOFS, TERRACES, CHHAJJA etc.

B.GUARD is a single component, flexible coating, designed to cope up with extreme stress and strain of expansion & contraction of roof and wall surfaces. It acts as an insulator to slab it is resistant to fungus, moss, roots & growth of microorganisms as well as to UV Rays. After curing, it forms a membrane that is flexible, elastic, and watertight without effecting the breathing property of the Building. Even porous building materials will not absorb water.

WATERPROOFING TREATMENT OF SUNKEN PORTION/ KITCHEN/ TOILETS/ UNDERGROUND WATER TANKS/ OVERHEAD WATER TANKS/ BASEMENTS.

BONDFIT 8000 is applied on outer wall and inner wall. It provides a flexible and elastic layer, which is non-toxic, anti-fungus and is suitable for potable water. It is applicable on damp surface as well. BONDFIT 8000 Coating can be applied with FIBREMESH where ever it is required.

EXPANSION JOINT TREATMENT

BPG 700 is a two-component system consisting of a base compound of LP Polymer & accelerator containing a chemical curing agent. BPG 700 Sealants cure by chemical reaction at ambient temperature to form an elastomeric rubber in joints. They are resistant to weathering, ozone, are flexible at both high and low temperatures and are also inert to a wide range of chemicals including solvents and fuels.