For mass concreting in concrete columns , beams and other RCC works, we suggest the use of STANRO SPS. It is a concrete Super Plasticizer and high range water reducing agent. It is an admixture for the production of free flowing concrete. The concrete with STANRO SPS is homogenous and free from bleeding and segregation. It imparts high workability to concrete. STANRO SPS improves the finishing of surface. STANRO SPS is suitable for use in pre-stress as well as pre-cast industry while manufacturing elements like beams, columns, slabs, railway slippers, concrete piles, rails, posts, electricity poles, concrete pipes etc.

• Plasticizer STANRO SPS (water reducing compound & super Plasticizer).

STANRO SPS is a concrete Super Plasticizer and high range water reducing agent. Admixture for the production of free flowing concrete or as a substantial water reducing agent for promoting high early and ultimate strength .The concrete with STANRO SPS is homogenous and free from bleeding and segregation. It imparts high workability to concrete mixes so that large or difficult pours can be carried out with little or no compaction.

Advantages

1. Produces pumpable concrete and gives high strength.
2. Improved surface finishes.
3. High impermeable concrete.
4. Make high workability concrete required little or no vibration during placing.
5. Water reducing Agent.

• Plasticizer with high early strength-STANRO SP-1

Advantages

STANRO SP-1 is high early strength Super Plasticizer and highly effective dual action liquid for the production of free flowing concrete or as a substantial water reducing Agent for promoting high early and ultimate strength. The concrete with Stanro SP-1 are homogenous and free from bleeding and segregation. It imparts high workability to concrete mixes so that large or difficult pours can be carried out with little or no compaction.

Uses

It is suitable for using pre-stress as well as pre-cast industries while manufacturing elements like beams, columns, slabs, railway slippers, concrete piles, rails, posts, electricity poles, concrete pipes etc. etc. It is also useful as a water reducing agent leading to high early strength concrete apart from free flowing concrete, pre-cast concrete, pre-stress concrete, bridges and cantilever structures, areas of concrete where form-work must be removed quickly or early loading applied.

• Super Plasticizer and accelerator STANRO-OC (for temperature upto-10oC).

STANRO OC is a super plasticizing and accelerating compound for all types of Concrete and Mortars for high altitude areas, where temperature goes below 00C. It is both, in the form of Powder and Liquid. It increases the setting time of the admixed concretes or mortars and is chloride free. It is suitable for use with all types of normal cements. Should be used in the course of mixing operation of concrete by means of suitable dosing devices. Can be added to gauging water. Enables quicker demoulding of formworks.

Advantages

1.Can be used in transportation of ready mixed concrete as also at construction sites.
2.Suitable for using in precast concrete yards for early demoulding of shutters despite low temperature.
3.Reacts chemically to lower the freezing point of precast concrete.
4.Useful as water reducing agent and subsequent increase in strength.
5.Free flowing concrete and can be easily pumped
6.Does not allow to form sudden congelation